LUCIDITY LED Load Resistor - 24V (Pack of 2) 56017-1

LUCIDITY LED Load Resistor - 24V (Pack of 2) 56017-1

Some vehicle lighting systems will not behave correctly when using low current draw LED lights. In order to correct this a Load Resistor can be fitted to compensate.

The LUCIDITY 24V LED Load Resistor is designed to overcome problems relating to load sensitive flasher systems where low current LED lamps have been fitted.One of the biggest advantages of LED lamps is their low current draw, however this can cause new problems in the electrical system. When converting incandescent lamps to LED the flasher may not recognise the LED lamp as it relies on a load to detect ‘globe outage’ resulting in fast flashing indicators or a warning lamp turning on at the dash.

The best solution is to fit a non-load sensitive flasher or a flasher with a measured load matching the LED load, but this is not always practical as many flashers are built into the vehicle’s onboard computer.The purpose built Low Voltage Brand of LED Load Resistors are a simple and effective solution to this problem, replacing the load that has been reduced by fitting LED lamp replacements for standard incandescent lamps.

Suitable for direction indicator and brake light circuits, LED Load Resistors are designed to draw the same current as a 21 watt incandescent globe, correcting any problems with low current draw. Built into an aluminium heat sink housing, the new Load Resistor is supplied with 2 wire tap connectors and 300mm of cable each end. They should be mounted on a heat resistant metal surface connecting the earth to the chassis and the indicator wire with the wire taps supplied.

FEATURES: