Cart 0
Rapid Screw Extractor (DBZ60G)

Rapid Screw Extractor (DBZ60G)

Shipping calculated at checkout.

Rapid Screw Extractor (DBZ60G)

Remove stuck or frozen screws with the rapid screw extractor. This is an easy to use tool that can be used to remove damaged screws. It comes with 2 types of removal bits which are designed to bite into and grip screw heads to suit various degrees of damage.

How to use the DBZ60G rapid screw extractor:

1st Bit – Press & Twist

4 edges of the cross tip can firmly grip the remaining corners of Phillips recess.

  1. Insert the 1st Bit into the handle grip and grip it as illustrated below.
  2. Place the bit tip into the screw head, then scrape away burs in the recess by twisting it back and forth lightly.
  3. After you feel the bit tip catches the corner of the recess, turn counter clockwise while pressing firmly downward.

2nd Bit – Strike & Turn

  1. Clean out any steel chips left in the screw recess.
  2. Fit the rubber sleeve to the 2nd Bit and position the blade in the recess.
  3. Strike the end of the bit with a hammer.
  4. Make sure the bit is self-standing upright, and then affix the grip on to the bit. DO NOT HIT THE GRIP WITH A HAMMER.
  5. Turn counter-clockwise while pressing firmly downward.

FEATURES:

  • No power required
  • No drilling required
  • No hammer required (1st bit only)

SHIPPING: Free Shipping and Delivery within Australia